发布截止时间:2018-08-18,职位截止日期见下面招聘内容。
珠海保税区摩天宇航空发动机维修有限公司招聘

珠海保税区摩天宇航空发动机维修有限公司招聘

        珠海保税区摩天宇航空发动机维修有限公司是中国南方航空集团和德国最大的发动机制造商MTU航空发动机股份有限公司各投资50%合资组建的民用航空发动机维修企业。公司位于珠海保税区内,比邻港澳,占地15.6万平方米,初期投资额1.89亿美元,设计年维修量为200台。除了配有现代化的设备和15万磅推力的现代化试车台,公司还拥有中国民航局CAAC、欧洲航空安全局EASA、美国民航局FAA、日本民航局JCAB等20多个国家和地区的适航维修许可证。

        自2003年1月正式营运以来,珠海摩天宇已为世界各国运营V2500和CFM56系列发动机的航空公司成功维修了2,000多台发动机,是目前国内首屈一指的航空发动机维修基地。为进一步满足未来发展需求,珠海摩天宇在2012年完成了厂房的扩建。公司的年产能从以前的200台增加到如今的300台,提升了50%。

MTU Maintenance Zhuhai is a 50-50 joint venture between China Southern Air Holding Company and MTU Aero Engines AG, Germany"s leading engine manufacturer. Launched with an initial investment of 189 million USD and a capacity of 200 engines per year, the company spreads over 156,000 square meters of land in the Zhuhai Free Trade Zone, close to Hong Kong and Macao. The company is equipped with a state-of-the-art machine pool and a highly modern test cell accommodating engines up to 150,000 pounds of thrust. The shop holds roughly 20 approvals, amongst others from the CAAC (Civil Aviation Administration of China), the European EASA (European Aviation Safety Agency), the US-FAA (Federal Aviation Authority) and the by JCAB (Japanese Civil Aviation Bureau).

Since it started operations in January 2003, MTU Maintenance Zhuhai has successfully overhauled more than 2,000 V2500 and CFM56 engines from airlines from all over the world. Today, it is the leading provider of aircraft engine maintenance, repair and overhaul services in China. To cater for the future growth, the company completed its facility extension in 2012. The annual capacity increases to 300 shop visits per year  - up 50% from its previous number of 200 engines per year.

Repair engineering manager维修工程经理

工作地点 Location:珠海

  • Ensure that all processes, documents, work plans etc., are in accordance with the regulations of authorities, OEMs and customers;
  • Supervise the repair documents preparation, order and definition of required tools consumable materials, make all ready for actual repairs;
  • Supervise the supporting for technical issues during normal production and new repair development, make all problems cleared;
  • Coordinate different departments to deal with deviation issues based on technical publications, authority requirement and knowledge of aero-engine, make problems solved;
  • Think about strategically new repair development, make important repairs forecasted and prepared;
  • Coordinate overlapped tasks between different shops, make inter-work centers repair going ahead smoothly;
  • Organize sharing meeting to share good or bad experiences to all members, aimed to get endless improvement;
  • Organize On-the-job training for new freshmen, make the new comers be qualified;
  • At least 8 years’ aero-engine MRO experiences;
  • Management experience with strong leadership skill;
  • Bachelor or above degree with major in aeronautical engine design/manufacture engineering, aeronautical engine process engineering;
  • Fluent English in reading, writing, speaking and listening.
应聘此职位 Apply Here

CIP Engineer Continuous Improvement Program Engineer 持续改进工程师

工作地点 Location:珠海

  • Analyze internal process and input proposal for yearly improvement plan;
  • Implement yearly improvement plan to make sure to meet the department’s objectives;
  • Develop CIP tools and training employee to use the tools properly for their improvement activity;
  • As an internal improvement consultant help the related area to identify improvement opportunities and guide to improve their performance as it needs;
  • Incorporate reporting such as SQEH etc., timely delivery to related party;
  • Involve quality issue (non-production related) investigation and raise an objective investigation report;
  • 3-4 years’ experience in similar occupation;
  • University Degree with major in aeronautic engineering or equivalent:
  • Familiarization with improvement concept including Six Sigma and Lean;
  • Good communication English skill.
应聘此职位 Apply Here

Material Coordinator航材协调员

工作地点 Location:珠海

  • Assure the availability of material according to the assembly plan of an engine
  • Coordination and scheduling of material flow (supply chain) in and throughout the shop
  • Rooting of parts into the repair-, Outside Vendor (OV)- and purchasing process
  • Coordination of Purchase- and repair-orders with all relevant departments
  • Management of the pool-stock and exchange of parts
  • Creation of statistics of material stocks and turnaround times
  • Update and modification of engine assembly plan
  • Support of material planning and cost reduction projects
  • Technical Bachelor Degree
  • Minimum of 3 years’ experience in similar function (material management) in aviation industry
  • Very good knowledge of English and computer skills (Windows applications and material management tools)


应聘此职位 Apply Here

AOG Engineer 在位支持工程师

工作地点 Location:珠海

  • According to customer AOG requirements, to ensure that the required work scope could be carried out, the corresponding working documents are full signed, final inspection and release specified work in customer location;
  • Control and monitor the whole process quality of onsite service, check all the parts certificates, ensure that the entire process with the MTU procedures and regulations;
  • Responsible for CIP of AOG on the technical side, with other departments to develop and update AOG work scope capability list. Support marketing department on AOG process improvement/optimization;
  • Perform all tasks according to CFM56 & V2500 AOG work scope capability list;
  • Be the AOG team leader, collect the documents and information for further analysis, ensure that the whole AOG process is in accordance with OP7511;
  • Support shop if necessary;
  • Participate in process management and project related to improve the company"s actual operation, to meet the requirements of the company;
  • Execute temporary, other work related to marketing department;
  • At least 5 years working experience in the field of aero engine maintenance. Be familiar with the Engine release procedure; Be familiar with the airworthy law and regulation. AOG experience is preferred;
  • CAAC PWT License is preferred;
  • Computer and English Skills: Fluent English and computer skills;
  • Strong ability to make clear statements;
  • Self-confident, easy to communicate and cooperate; strong ability to resist compression and strain;
  • The work nature of this position need to be on standby all the times and travel frequently for performing AOG. Please consider the situation (including family and life).
应聘此职位 Apply Here

Quality Certifying Engineer质量放行工程师

工作地点 Location:珠海

  • Review customer"s work scope , including the removal reason, the engine operation time and cycle, each module and accessories specific work scope, review the required SB, AD evaluation, life limit  list, ACC list, engine repair history of deviation repair and other customer requirements and so on, in order to ensure and develop to meet MTU the internal process of WRB;
  • Control and monitor the whole process quality of engine repair workshop, including engine and module inspection, disassemble, piece part inspection, examination and repair; approval of the documents of second-hand life limit part, exchange part approval, evaluation of outside vendor parts quality, checking assembly processes and engine test troubleshooting, ensure that the entire process with the MTU procedures and regulations;
  • Assist marketing requirements, with marketing department and other departments to develop AOG work scope, to ensure that the requirements approved scope of the work carried out, the corresponding working documents signed full, final inspection and release the engine in customer location;
  • According to the company operation procedure, assessment of the latest OEM documents and airworthiness regulations, ensure latest Airworthiness Directives, engine and module documents implemented in the internal system;
  • Experience: above 6 years’ experience of operation and maintenance of aircraft gas turbine engine.
  • Holding CAAC PWT (CAR66) or P (CAR65) license.
  • Training Received: Aircraft/gas turbine engine maintenance engineering; Aviation      regulation(CCAR-145 is the minimum);
应聘此职位 Apply Here

Mechanic发动机维修机械员

工作地点 Location:珠海

  • Disassemble and assemble the engines and modules, document the work steps;
  • Perform pre-inspection of parts; record findings during pre-inspection; handling of missing parts situation during assembly process; ensure tracking parts documentation; taking pictures of incoming status and damages;
  • Handle and maintain the equipment and special tools in good condition;
  • Technical secondary school or above, major in aeroengine or mechanics;
  • At least 2 years’ experience as licensed aircraft or engine mechanic;
  • Team working spirit, hardworking, responsible and reliable;
  • Capable of reading and understanding written technical English instructions.
应聘此职位 Apply Here

Technical Buyer航材采购

工作地点 Location:珠海

  • Purchase V2500 and CFM56 spare parts in accordance with production planning;
  • Communicate with suppliers about parts tracking;
  • Attend production meeting to get the requirement information;
  • Solve non-compliance part problems timely and efficiently;
  • Update the catalog price in system;
  • Sell surplus parts to minimize inventory;
  • At least 2- year-experience in the field of purchasing;
  • Good knowledge in English, CET-6 at least;
  • Familiarity with V2500 and CFM56 engine system; Usage of  engine manuals and other repair documents
应聘此职位 Apply Here

 

 

咨询,评论本次招聘。我要咨询或评论 ←若未登录,点击无效。需登录后才可发表咨询或评论。

发布我的评论:

评论内容将公开显示。可以填写咨询问题。但请勿填写您的个人隐私信息,比如手机,邮箱。以免带来烦扰。如需应聘,可直接点职位右下角“应聘此职位”。